Benzo Energy

Electronic devices have become an indispensable part of people's lives, but these rely on battery-powered electronic products may have some headaches. Many explosions of lithium-ion batteries have made people realize that small lithium-ion batteries may also cause significant harm. The explosion of these lithium-ion batteries is often due to the purchase of fake and shoddy products, because the quality of the battery itself is not enough. However, some inadvertent details in the process of using lithium-ion batteries will also make your battery dangerous.

After years of development, the lithium battery industry has formed a complete industrial chain with a high degree of specialization. Do you know how the lithium battery is made?

The battey as one of the most important parts of electric vehicles, batteries are also valued by major car companies. At present, there are mainly two types of batteries used by car companies to install vehicles: ternary lithium batteries and lithium iron phosphate batteries. However, BYD's blade battery (a new generation of lithium iron phosphate battery) was born, and car companies also have a more competitive battery option.

The INRUSH PEAK discharge current and continuous discharge current mainly depend on the battery cell. The overcurrent protection of the protection board only sets a safe discharge current parameter for the battery. If the battery works within this safety parameter, no safety will occur. (but if the discharge current exceeds the load current of the cell allowed, it may also shorten the battery cycle life)

Both the camera drone battery and the mobile phone battery are lithium-ion batteries. The drone battery is the source of power for the device and has higher requirements for its safety performance. However, there is a difference between the two. The drone battery has a significant feature compared to the mobile phone battery --- high rate discharge. The drone battery needs a large current to discharge to meet the requirements of the drone in different environments. For example, in aerial photography, if a strong wind is encountered, the battery must be discharged with a large current to ensure the stability of the drone's position. Because of different requirements, the life of the camera drone battery is relatively short.

Polymer lithium ion battery is a kind of lithium ion battery, but compared with liquid lithium ion battery (Li-ion), it has high energy density, more compact, ultra-thin, light weight, high safety and low cost Many obvious advantages are a new type of battery. Below we detail the advantages and disadvantages of polymer lithium-ion batteries:

Generally speaking, the most common power batteries are lithium iron phosphate batteries, lithium manganate batteries, lithium cobalt oxide batteries, and ternary lithium batteries.

The overwhelming majority of 18650 lithium batteries are encapsulated in steel shells. Due to the lack of protection, over-charged batteries will suddenly increase their internal pressure and explode when they exceed the withstand value. Short circuit, excessive temperature or squeezing or even puncturing the battery may cause the battery to explode.

Parallel connection: Several batteries, the positive electrode and the positive electrode, the negative electrode and the negative electrode are connected together side by side, the voltage remains unchanged, the capacity increases, and the corresponding current also increases.

Serial connection: Several batteries are connected in series, that is, the positive electrode and the negative electrode. The negative electrode of the first battery is connected to the positive electrode of the second battery, and so on. The voltage increases, the capacity does not change.

Generally, a 3.7V lithium battery needs an overcharge and overdischarge protection circuit board. If the battery does not have a protection board, it can only be charged with a voltage of about 4.2V, because the ideal full charge voltage of the lithium battery is 4.2V, and the voltage may be damaged if it exceeds 4.2V. The battery is charged by this method and the battery status needs to be monitored at all times.